FOR RELEASE:  Immediate                                          
CONTACT:  Chris Mahn, +44 1548 858 770

EFI Announces European Sales Division For Company’s Line Of Special Purpose Metals And Alloys

Chris Mahn appointed European Sales Manager

Ed Fagan Inc has announced a new European sales division to distribute the company’s special purpose metals and alloys to the European market. Mr. Ed Fagan, president said: “This new European sales division will allow us to better serve our customers overseas, and help us further penetrate this well established market”. In addition, Ed Fagan Inc has announced the appointment of Chris Mahn as European sales manager. 

Mr. Mahn will be responsible for both selling and providing technical support for the company’s line of glass-to-metal sealing, controlled expansion, electrical/electronic, refractory, and soft magnetic (non permanent magnetic) metals and alloys and other hard-to-find materials. Mr. Mahn has worked within the industry for twelve years with Datum Alloys Ltd as sales director where he was one of the original staff members responsible for developing the Controlled Thermal Expansion alloys markets in Europe while using Ed Fagan Inc as a material supplier.  Most recently, he has been responsible for developing the Solder Stencil market in Europe and also working with Ed Fagan Inc to open the American Stencil market to Datum Alloys.  Mr. Mahn is a MBA graduate of University of Exeter, Chartered Institute of Marketing. He lives in the southwest of England with his wife and twin sons, and also speaks German.

The European division is located at: Ed Fagan Inc Europe, Unit 3a South Hams Business Park, Churchstow, Kingsbridge, Devon UK, TQ7 3QH. Tel: +44 1548 858 770 Fax: +44 1548 856 516, website www.edfagan.co.uk, email chris@edfagan.co.uk.

Ed Fagan Inc. has supplied specialty metals and alloys such as glass-to-metal sealing, controlled expansion, electrical/electronic, refractory, and soft magnetic (non permanent magnetic) metals and alloys; and other hard-to-find materials in various forms including sheet, plate, rod, bar, coil, and foil for over 40 years to the aerospace, electronics, optics, magnetic, lighting, heat treating, defense and other high-technology industries.

Ed Fagan Inc announces that it has added a broad range of diameters of Carpenter Vim Var Core Iron to its inventory in Franklin Lakes, NJ.  These bars are stocked in 12 foot random lengeths and can be cut to your requirements. 

Vim Var Core Iron Diameters

.750"	1.75"	4.125"
.835"	2.375"	5.500"
1.000"	2.625"	6.000"
1.250"	3.000"	10.250"

Carpenter VIM VAR Core Iron is a low carbon magnetic iron produced using vacuum induction melting plus vacuum arc remelting practices.  Other elements commonly found in low carbon irons are held as low as possible to ensure good DC magnetic properties. 

This double melting technique controls the distribution of nonmetallic inclusions to a minimum length and frequency so that thin wall sections will not contain leaks due to internal discontinuities. 

Carpenter VIM VAR Core Iron is often used in the manufacture of soft magnetic components where vacuum integrity is needed such as in power tubes and microwave devices.  In addition, relays, solenoids, and magnetic pole pieces for scientific instruments may be made utilizing the qualities of VIM VAR Core Iron.

If you have any furhter questions, regarding the technical specifications of Carpenter VIM VAR Core Iron, you can:

Download the Data Sheet

Email our Experts

Call or Sale Staff at 800 348 6268 in the US and Canada or 201 891 4003 world wide

 

ED FAGAN INC. supplies the highest quality specialty metals and special purpose alloys to companies with specialized requirements, from Fortune 500 companies to one-man machine shops. We are large enough to meet your material needs and nimble enough to respond to the unexpected challenges. EFI is your partner for success.

ED FAGAN INC. Goes the Extra Mile (or 147 miles) for our Customers Monday, February 20, 2006, Franklin Lakes, New Jersey, EFI received a 911 call from a castings manufacturer serving the aerospace, biomedical, automotive, power generation, and other specialized industries. Up against a deadline, they desperately needed six ¼”x2”x52” molybdenum rails to hold the baskets in their vacuum heat treating furnaces. EFI’s deep inventory included the necessary molybdenum plate (¼”x12”x72”) from which the rails could be cut; however they required specialty cutting on a water jet cutter. Scott Williams, Account Manager, put the plates in his car, drove the 147 miles to the cutter, and waited while the plates were cut. The rails were delivered to our customer Tuesday morning, less than 24 hours after the call came in. EFI offers technical assistance. We suggested to this manufacturer that Moly TZM, an alloy with a higher heat tolerance than molybdenum, might be an even better solution for the furnaces which reach 1300o C, the upper limit for molybdenum. TZM remains stable and functional to temperatures of 1650 o C. The customer is now testing both products to determine which one is most cost-effective. ED FAGAN INC. is a U.S. based, family owned business that for over forty years has been solving the specialty metal and alloy material needs of the heat treating, aerospace, telecom, optics, electronic, and many other industries with exacting specifications. We are the supplier of choice, offering the highest quality materials, an unsurpassed depth of inventory, and superior customer service. We stock the material so you don’t have to. And if we do not have it in stock, we will get it for you.